Sidehammers - Adjusting Trigger Pull/Sear Engagement

Semisane · 02-06-2011, 09:28 PM

bronko22000 · 02-07-2011, 03:08 PM

Semi, My cahoonies aren't big enough to try that.

Semisane · 02-07-2011, 04:08 PM

I've never done it bronko - never needed it. But it looks like a pretty simple fix if you need it.

sabotloader · 02-07-2011, 04:11 PM

Semisane

There is a part missing out of your drawing that alleviates some of the problem... The 'fly' is an integral part nowdays.

Semisane · 02-07-2011, 04:37 PM

It's not my drawing Sabotloader. That's and article from one of the old Muzzle Blasts magazines I recently acquired.

MountainDevil54 · 02-07-2011, 04:48 PM

that'd work on many of the single trigger rifles. I think though i'd try some welding before i used an epoxy. I'd prefer a bit more strength. But damn handy if you're in a fix.

sabotloader · 02-07-2011, 05:19 PM

Quote:

Originally Posted by Semisane

It's not my drawing Sabotloader. That's and article from one of the old Muzzle Blasts magazines I recently acquired.

Corrrect Semi, i knew that but folks that might look at their lock today would, in most cases, find that additional part.

Still the work suggested is a valuable point in many cases... especially when not using the set trigger...