knight bolt assembly HELP!

[canalside]

Took my bolt apart cant get it back together was ajusting plunger turned it right to red on threds cant get it out wont turn cant get back together.Opening day of shotgun was today cant get it back together.TRIED calling knight all day busy.Any one care to give me some know how with this bolt. PLEASE! Thanks Jeff

[tjj]

The Knight website has owners manuels, click on them, find your rifle, and the bolt assembly/disassembly instructions are easy to follow.

[sabotloader]

canalside

Turn the 'secondary safety' all the way in tight it will take a bit of effort near the end - that will pull the hammer back and allow you to screw the assembly back into the bolt housing. Once it in place - just un-screw the 'secondary safty'

[driftrider]

Do you have your owners manual? It should detail disassembly/reassembly of the rifle. What model is it?

You can try looking here: http://www.knightrifles.com/instructionmanual/default

Mike

[canalside]

Thanks for the replys I have the manual i believe i did what it says not do.Its a disc extreme red plastic,screw to hold bolt not the push release.Sabotloader i would have to put it in vice and turn it with pliers? Because I ripped all skin off my finger trying to do it with my hands Thanks again Jeff

[sabotloader]

canalside

Sabotloader i would have to put it in vice and turn it with pliers?

Ouch! if you do that use a piece of leather or a wrag or something between the secondary safety and the pliers - so you do not marr it...

[Underclocked]

Maybe he needs a C-tool? Didn't some of the extremes pre-date that change?

[sabotloader]

UC

You are right I forgot all about that tool....

THe only reason I jumped on the secondary safety was he mentioned red disc's...

canalside

UC is robably right you may need a tool called a 'C' tool - hopefully it will be in your acccessories.

And if that is the case you will need to check the manual...