TC breach plug removal

[Harp98]

Where can I get a tool to remove the breach plug for a 50 cal Encore?

Harp

[lemoyne]

Out of your tool box ,use a ratchet with an extension [the long one] and a standard socket.

[SWThomas]

Or you could try TC's website. I'm sure they sell the tool you need on there.

[sabotloader]

Harp98

If you want the factory tool TC will gladly send it to you, but the best best is as Lee suggested.

A 7/16's socket, I prefer a deep socket a long extension, and a reversible ratchet...

such as this...

[falcon]

The breech plug removal tool that TC sells is pretty flimsy. Mine broke and i went to the 1/4" drive 7/16" deep well socket.

[Semisane]

Me to. I use a 1/4" drive ratchet, 10" extension bar, 7/16" socket for my Omega and 1/2" socket for the Mustang. I even had a 1/2" nut welded on the end of the Mustang's stock bolt (right on top of the flat screwdriver slot) so I can remove the stock with the same socket I use for the breech plug.

[Harp98]

Thanks guys for your help.....

Harp