54cal barrel on cva hawkens barrel

[corey012778]

well, took some brain storming but I got it to fit the stock good.

foam spacers


barrel in the stock









I am planning to save up and get a stock for it. looks like md may have some fun down the road. lol

[Semisane]

Hey Corey, if that were my project I would fully glass bed the barrel with it centered in the stock and bend the hammer a little to hit the nipple correctly. That would be a permanent fix with the best likelyhood of ending up with a gun that shoots consistently.

[corey012778]

I am trying keep where I can drop the 50cal barrel for it. but I do have a little room with both barrel to bend the hammer enough. I am going to finish fitting the parts on the 54cal. you know never know. I am just get another stock.[8D]

[Semisane]

OK. I didn't realize you were going for a switch barrel set up. Yeah, get another stock. That weather strip bushing is likely to cause more problems than it's worth.

[corey012778]

I can get the barrel in the stock with out them and it is a little loose. maybe if I bent the lug on the 54 maybe I can get it to tighten up.

[Semisane]

It's still likely to shoot all over the place (my opinion anyway).

[corey012778]

smelly brain farts, it always happens to me. lmao