just wondering if anybody out there still shoots the white shooting systems rifles. i have a G series .50 cal. was wondering if could be changed over to use 209 primers?
__________________
white shooting system .50cal
cva optmia elite .50cal
ruger M77 30-06
ruger M77 .257 roberts
ruger M77 300 win mag
rem 700 30-06
rem 700 7mm rem mag
rem 700ML .50 cal
Yep I have 4. 2 White S91's, onein .504 and the other in.451. 2 White Lightnings in .504. All 4 of mine are set up up with the #11 nipple. The White Rifles website is up again, they might have some 209 kits left.
__________________
White Super 91 .504/.451
2 White Lightnings .504
White M2000 Blacktail Hunter .504
I have a 209 system for my Model 97 (thatI do not use)and I do think it would fit the G series White as they breech plugs can be changed out. BUT I am not sure if the hammer would work. The 209 does take a special hammer. Why not email White Rifles and see if they have a converter kit. Or if it can even be done. I was told they are back up and running with parts..
Personally I would just shoot the #11 cap. If you shoot loose powder, that #11 system is all you need. Just make sure to use a quality cap like the RWS, CCI magnum, or the Remington 40% hotter #11 cap. They all work on my Whites and I have shot them in all kinds of weather with little problems.
Also making sure the rifle is ready to shoot is very important. Swab that barrel, pop a couple #11 caps through the breech plug first, then load. After that, the rifle shoot fine. Also if you have a rifle where the #11 fits real tight, take some Emory paper and polish that nipple just a little down so the caps fit tight, but fit all the way onto the nipple snout. Actually a #11 cap is a lot more weather proof then you might think.
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."
I have a White M97 U-Mag and the 209 breech plug is all I shoot from it. There certainly is some blow back from the powder charge but I do not think it is that much more than a #11 breech plug.
Cayugad is correct you will probably need a different hammer also as you need a pin in the end of the hammer.
I think if you shoot a White, and I am not all that familiar with the G series you are going to need some sort of scope protection if you are mounting a scope.
I just wrap mine is a camo cloth and it works just fine...
__________________
Keep on Shooting Muzzleloaders they are a Blast
I happen to be VERY FONDof that stock he has there. I like them. A bit heavy mind you, but they soak up the recoil like mad. I have that same on my White Ultra Mag .503 and my White M97 .451. I bet you're one of them black plastic type there Cascadedad...
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."
Dave, I was just funnin with Mike. He's got that ugly (pretty), one-of-a-kind camo stocks that everyone likes to give them a hard time about. Maybe he can post a picture of it to show it off a little....
Casacadedad I knew you were kidding but I had to give you a little grief and tease you... You must mean that Jackson Pollock style one he has... or is that on one of his Omega's. That man has so many rifles I lost track of all of them.
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."