knight breech plug
04-20-2008, 08:56 AM
#1
Fork Horn
Thread Starter
Join Date: Jan 2008
Location: Green Bay wi
Posts: 454
knight breech plug
I am thinking about switching from the plastic jacket to the breech plug which uses the bare 209.
Just wondering if it decreases blow back and byhow much. Do you have to get a different bolt assembly also or just the plug and adapter that comes with the plug. Thanx
Just wondering if it decreases blow back and byhow much. Do you have to get a different bolt assembly also or just the plug and adapter that comes with the plug. Thanx
04-20-2008, 12:07 PM
#2
Typical Buck
Join Date: Dec 2004
Location: Nebraska
Posts: 601
RE: knight breech plug
Just tried mine yesterday
Zero blow back
The plug and bolt adapter is all you need. It took me awhile to get those little 209's ta load smoothly. Got too used ta the large Red Plastic Jackets[&:]
I had some grease on my bolt for lube, but next time out will be with a dry bolt. Had to turn the gun on it's side and pound it to get them to fall out sometimes.
Also discovered that Goex Pinnacle Powder creates a Crud Ring (For the Very First Time Ever) at the breech, when using the Sealed Breech System[&:][:@]
Zero blow backThe plug and bolt adapter is all you need. It took me awhile to get those little 209's ta load smoothly. Got too used ta the large Red Plastic Jackets[&:]
I had some grease on my bolt for lube, but next time out will be with a dry bolt. Had to turn the gun on it's side and pound it to get them to fall out sometimes.
Also discovered that Goex Pinnacle Powder creates a Crud Ring (For the Very First Time Ever) at the breech, when using the Sealed Breech System[&:][:@]
