logo
 

Go Back   HuntingNet.com Forums > Firearms Forum > Black Powder

Black Powder Ask opinions of other hunters on new technology, gear, and the methods of blackpowder hunting.

Reply
 
Thread Tools
Old 01-21-2007, 02:19 PM   #1
Nontypical Buck
 
Sharp Shooter's Avatar
 
Join Date: Feb 2004
Location: Colorado
Posts: 1,799
Default Mastering a Flinter

What should I do in bad weather with my flinter? I will be elk hunting the rocky mountains in September. What do you do to weatherproof it and make sure it will go off? I found a great link on it. I was thinking I could take sno-seal (beeswax based) and seal the pan with it. I am going to need some suggestions. I found good info on this site.
http://members.aye.net/~bspen/wetflints.html
__________________
Dream as if you will live forever, live as if you will die tomorrow!
Sharp Shooter is offline   Reply With Quote
Old 01-21-2007, 02:43 PM   #2
 
Join Date: Jul 2006
Location:
Posts: 5,180
Send a message via Yahoo to frontier gander
Default RE: Mastering a Flinter

I hunt in northern colorado and took my flintlock mule deer hunting, ran into some light rain on the way back to the truck. I simply dumped the priming pan and covered it over with my stocking cap. I think dumping the powder and finding something to cover the lock area is the best way. Im not sure about that snow seal stuff.
frontier gander is offline   Reply With Quote
Old 01-21-2007, 03:25 PM   #3
Boone & Crockett
 
cayugad's Avatar
 
Join Date: Feb 2003
Location: Wisconsin
Posts: 17,917
Default RE: Mastering a Flinter

On the two rifles I have the actual frizzen pan seals so tight that if I hold it up to the light, I can make out no light under the frizzen lid. Snow seal would only be messy in a case like that. If you want to smear snow seal, or candle wax along the edge, it should not hurt anything.

A friend of mine puts a simple baggie (for sandwiches) over the lock and frizzen and then tucks the how mess under his arm. When he is ready to shoot he pulls the baggie off and cuts loose.

If you want to stay traditional, as your signature suggests, I wouldperhaps look into a leather cow knee. Get it well oiled and it should keep the lock dry. Change your prime every sooften, and youshould be fine.
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."
cayugad is offline   Reply With Quote
Old 01-21-2007, 03:54 PM   #4
Giant Nontypical
 
Join Date: Nov 2005
Posts: 5,745
Default RE: Mastering a Flinter

Tube of deck wax for crossbow its about the size and constructed like a tube of lip stick used very lightly it will seal a good fiting pan and frizzen and used lightly its not messy. Lee
__________________
Lee
lemoyne is offline   Reply With Quote
Old 01-21-2007, 03:56 PM   #5
Nontypical Buck
 
Join Date: Dec 2005
Location:
Posts: 3,246
Default RE: Mastering a Flinter

Quote:
ORIGINAL: cayugad

On the two rifles I have the actual frizzen pan seals so tight that if I hold it up to the light, I can make out no light under the frizzen lid. Snow seal would only be messy in a case like that. If you want to smear snow seal, or candle wax along the edge, it should not hurt anything.

A friend of mine puts a simple baggie (for sandwiches) over the lock and frizzen and then tucks the how mess under his arm. When he is ready to shoot he pulls the baggie off and cuts loose.

If you want to stay traditional, as your signature suggests, I wouldperhaps look into a leather cow knee. Get it well oiled and it should keep the lock dry. Change your prime every sooften, and youshould be fine.
I used the baggie before and it keeps coming off, so I am going to something like this:

http://rmcsports.com/catalog.htm

Chap Gleason Va




__________________
Chapman Gleason
Purcellville Va
http://www.the-gleasons.com
gleason.chapman is offline   Reply With Quote
Old 01-21-2007, 05:44 PM   #6
Giant Nontypical
 
mauser06's Avatar
 
Join Date: Feb 2003
Location: PA
Posts: 9,087
Default RE: Mastering a Flinter

i use a leather cows knee. i got a good seal but sno seal or wax or crisco or something could only help. but you still gotta worry about the flint and frizzen. one drop and your out of commission. i use a cows knee and some caution..try to keep it tucked under my arm out whatever else i can do. i also reprime pretty frequently gotta make sure you can reprime and not get it wet though..which can be tricky. i can honestly say in my 5 or so years of hunting with the flinter in rain and snow ive never had a misfire. days like that i go to the farm at the end of the day and fire the rifle just to see IF it would have went off. so far so good and for some reason we always get alot of rain during our flintlock season...wierd how that works out...
__________________
>>----Give 'em the shaft!--->
mauser06 is offline   Reply With Quote
 
 
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mastering back tension sr77 Bowhunting 5 09-07-2008 10:18 AM
Newbie mastering calls and sounds jlbspd Turkey Hunting 9 01-09-2008 07:50 AM
Went And Done It - Flinter On The Way Semisane Black Powder 17 11-28-2007 12:28 AM
T/C 45 FLINTER HAVE TO LET IT GO lonewolf5348 Guns 1 07-02-2007 09:58 AM
Looking for flinter Sharp Shooter Black Powder 2 02-17-2007 10:55 AM

 

All times are GMT -8. The time now is 03:43 AM.