I decided to finish the final tuning of the scope at the 70 yard mark since that's where I like them sighted in at. The first five shots under the bull was more then good. I then over cranked it for one and shot over the bull. After making a final adjustment, the other four fell in to the bull like they should. Then to make sure it was not a lucky set, I took a poke at all four corner bulls.
The to press my luck, I decided to shoot groups in the corners. Again, I was more then happy with how this rifle shot. I was shooting 70 grains of Triple Se7en 3f with 2 1/16th fiber wads and a 500 grain .504 BullShop conical bullet.[/align][/align]I swabbed the barrel after the 10th shot. The actual weight of the range rod was all that was necessary to seat the .504 conical after the two wads were set of course. I then would check it, and using the CCI Magnum #11 caps the rifle performed perfect as always.
[/align]
I sure do like this White Rifle and the Nikon Pro Sport scope with the Warne QD rings...
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."
OK - you know that I don't shoot those conicals, (so allow me at least one dumb question) but after reading your post and cascadedads post about how easy those conicals drop down the barrel of the Whites - what keeps them seated on the powder? I am thinking in an all day hunting situation when the gun hauled all around heck's half acre. I never try to mistreat my gun but I know in a day of hunting it does suffer some bings and bangs.
It really does not seem to me that .5045 is tight enough - if the bore is .504 an additional .005 seems pretty slight... it would worry me.
Ok I am done being dumb this time- gemme plastic - ( I keep telling UC it is not plastic anymore but I can not change his mind)
__________________
Keep on Shooting Muzzleloaders they are a Blast
I agree that these conicals do load very loose. Although as the barrel fowls out, they fit much tighter and better. I think it was UC or Surveyor that was talking about teflon taping them to keep the first one in the barrel. I am going to be testing that a little more in the near future.
I had tried to shake them off the loads. The No Excuse Conicals which are .503 I can move off the load and shake them right back out the barrel. The BullShop fit a little tighter although this batch I got this time are not as tight as the last batch, which is why I want to try a few things with them. I think that's why a lot of the people are asking for a .5045 instead of the .504. I like the accuracy I get with these and will stick with them.
As for loading, I use a heavy range rod. After I seat the wads, I put the bullet into the muzzle and the weight of the rod will seat the projectile almost. Although when shooting Goex this is not the case and I suspect this is because of the additional fowling in the barrel from that powder. Also they would be harder to move off the load with the Goex which I will be testing next week as well.
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."
I got to shoot some of those Bullshops today too. Was 94 degrees when I quit shooting at 10:00. Had to take the kids to the pool to cool everybody off. I took some picture, but your going to have to wait until after I eat a burger to get them.
I know with mine and no excuse's they will fall out the barrel in fact they fly out a couple feet when I raise the rifle. The Bulls seem to stay put however. I have ordered some .5045 though (not here yet)
Redclub
I know with mine and no excuse's they will fall out the barrel in fact they fly out a couple feet when I raise the rifle. The Bulls seem to stay put however. I have ordered some .5045 though (not here yet)
Redclub
Keep us posted on how the bigger .5045 work in your rifle. These .5040 I shoot load easy and shoot great, so it would be interesting to see how those you ordered work.
__________________
"Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, a total wreck, screaming Yahoo, with a big smile on your face."
Fine tuning my Nikon Pro Staff on the White
