E4 cams for E5s or E6s or would buy
#3
Thread Starter
Join Date: Jan 2004
Posts: 6
RE: E4 cams for E5s or E6s or would buy
Thanks for your interest W.A. I haven't found any shorter than 28.5 yet. Did learn from Bow Tech today tho that any dealer should be willing to change those no problem. Also have been comparing draw length on the cams to lengths on last years Pro 40 duallys and some others I have, and am finding these new ones to run about one half in. shorter. So I may be ok after all. Will have to shoot this one for a bit. If I change now, it wouldn't be for more than 1/2 in shorter. In other words, the E-5 cam.at 28 in. On the duallys, I've been shooting both the 27.5 and the 28. Hard for me to part with those bows, and I may not. Will keep you in mind.
#4
Join Date: Mar 2004
Location:
Posts: 150
RE: E4 cams for E5s or E6s or would buy
Hunterrog,
Correct, the binary cams seem to be about 1/4" shorter drawlength than the single and dual cam bows. The cams can be changed in 1/2" increments, for a cost of $60 at any BowTech Pro Shop.
My proposal was for the cams only. I currently have 29" cams and would like to go down to 28.5" cams.
I would give$30 plus shipping, this would be a good deal for both of us, getting our bows right for half the cost.
Let me know.
Correct, the binary cams seem to be about 1/4" shorter drawlength than the single and dual cam bows. The cams can be changed in 1/2" increments, for a cost of $60 at any BowTech Pro Shop.
My proposal was for the cams only. I currently have 29" cams and would like to go down to 28.5" cams.
I would give$30 plus shipping, this would be a good deal for both of us, getting our bows right for half the cost.
Let me know.