HuntingNet.com Forums - View Single Post - Setting up to do my own technical work, any help??
Old 06-04-2003 | 07:29 AM
  #3  
BobCo19-65's Avatar
BobCo19-65
Giant Nontypical
 
Joined: Feb 2003
Posts: 7,571
Likes: 0
From:
Default RE: Setting up to do my own technical work, any help??

My advice is also to start small. You will have to develope some skills since you stated that you are new to this. Trying to tackle everything at once may be very tough. I would start with the arrow making level and then progress. Hopefully your pro shop owner is experienced (has some patience) and can help you. But trying to get them to help you with everything at once is a very tough thing to ask. You can get an aweful lot of info here on the board, so ask a lot of questions here also.

For example, I could tell you from expereince that you may not need the fletch stripper for making arrows. I have found other methods that work a lot better. I use a curved razor blade that I got from the hoppy shop that will do circles around a fletch stripper. I also bought the fletch stripper when I started out but didn' t like it at all.
BobCo19-65 is offline  
Reply