ORIGINAL: lrhuntr
Yeah just got my highlander and had to change the draw lenght as well. Just loosen those screws and move it to your draw length should say 27-30 or what ever yours is. If you have your manual for the bow it will tell u in there too. Good luck.
That is right... When I got my Reflex Highlander, it was set at "30". The bow shop re-measured me and we decided to drop me down to "29". It was easy for the bowshop to do. Undo the allen bolt, rotate the module to the appropriate setting, and tighten it back up.
Butch A.